Name: LM50-5X 5 axis car milling composite center
Brand: Ningbo Kofu Machine Tool Equipment Co., Ltd.
Availability: InStock

Grupe proizvoda

Informacije o firmi

Nivo transakcije

Član VIP
Kontakt
Telefon

13336688030
Адрес

Ningbo Beilun District Little Port (Zhutian Village) Latiyun Road No. 60

Kontakt sada

LM50-5X 5 axis car milling composite center

Допутник контакта

Još proizvoda

Detalji proizvoda

Bayanna kɛl:

LM50 ye 5 axis car milling composite center, ye 9 axis control, 5 axis coupling CNC machine. Machine tool configuration German SIEMENS840D CNC system; B-axis, Y-axis; Main, sub-spindle ye cɔl coaxial opposite; A ye tɔ̈ɔ̈u nhial machine tool, a ye tɔ̈ɔ̈u nhial CNC milling spindle, a ye tɔ̈ɔ̈u nhial machine tool, a ye tɔ̈ɔ̈u nhial machine tool, a ye tɔ̈ɔ̈u nhial machine tool, a ye tɔ̈ɔ̈u nhial machine tool; A lëu bɛ̈n ya tɔ̈ɔ̈u në kaam tök de 36 ye kek tɔ̈ɔ̈u. Masin ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ

Karakteristika masin:

● Masin ye luui në kë ye cɔl horizontal whole body structure, 60° inclined guide rail ku horizontal guide rail, ye cɔl horizontal guide rail, ye cɔl horizontal guide rail, ye cɔl horizontal guide rail, ye cɔl horizontal guide rail, ye cɔl horizontal guide rail, ye cɔl horizontal guide rail. Machine tool ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ

● High rigidity Y axis, machine tool adopts 2 sets of guide rail synthetic motion to achieve Y axis feed, and bear the cutting force from Y axis, ensuring Y axis has sufficient rigidity. ● High rigidity Y axis, machine tool adopts 2 sets of guide rail synthetic motion to achieve Y axis feed, and bear the cutting force from Y axis, ensuring Y axis has sufficient rigidity.

● Main spindle configured German SIEMENS high performance AC spindle motor, with low speed characteristics good, output torque large characteristics. ● Main spindle configured German SIEMENS high performance AC spindle motor, with low speed characteristics good, output torque large characteristics. ● Main spindle configured German SIEMENS high performance AC spindle motor, with low speed characteristics good, output torque large characteristics. Sub-spindle motor ye luui në German SIEMENS high performance permanent magnet built-in synchronous motor. A tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n Sub-spindle bɛ se ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ.

				LM50-5X
Parameters	Number of coupling axes		Axis	5
	Maximum dɛmɛtɛr dɛmɛtɛr dɛmɛtɛr dɛmɛtɛr dɛmɛtɛr dɛmɛtɛr dɛmɛtɛr		mm	Φ650
	Max processing diameter		mm	Φ500
	Largest spacing of the cardboard (standard with the cardboard) (ye kaam ye kaam ye kaam ye kaam ye kaam ye kaam ye kaam ye kaam ye kaam ye kaam ye kaam ye kaam ye kaam ye kaam ye kaam ye kaam)		mm	1000
	Maximum turning length (ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye)		mm	1000
	Spindle centre to ground height		mm	1360
Main axis	Diameter kaam			10 "
	Spindle nose end			A2-8
	Diameter of the spindle hole (Diameter of the spindle hole)		mm	Φ76
	Diameter bearing front spindle		mm	Φ140
	Puwol maksimum		kw	33
	Speed ye dɔɔni		rpm	3200
Sub-spindle	Diameter kaam			10 "
	Spindle nose end			A2-8
	Diameter of the spindle hole (Diameter of the spindle hole)		mm	Φ72
	Diameter bearing front spindle		mm	Φ120
	Puwol maksimum		kw	27
	Speed ye dɔɔni		rpm	3600
	Lɛɛr (Z3)		m/min	24
Lɔ̈ɔ̈m	X1/Y1/Z1 axis	Yök	mm	490/±80/1110
		Speed ye	m/min	24/20/24
		Puwol maksimum	kw	3.8/3.5/8
		Maksimum torque	Nm	27/20/50
Lɔ̈k kɛ̈ɛ̈r	X2/Z2 axis	Yök	mm	210/1050
		Speed ye	m/min	24/24
		Puwol maksimum	kw	3.2/4.8
		Maksimum torque	Nm	19.5/27
Mill/Axle	Speed ye dɔŋ ye dɔŋ ye dɔŋ ye dɔŋ ye dɔŋ ye dɔŋ ye dɔŋ ye dɔŋ ye dɔŋ ye dɔŋ ye dɔŋ ye dɔŋ ye dɔŋ ye dɔŋ ye dɔŋ ye dɔŋ		rpm	7000
	Puwol		kw	17/22
	Torque		Nm	100/128
	Handle			Capto-C6
	Diameter de bar de boring		mm	Φ40
	Knife		mm×mm	32×25
	Disk milling machine Maximum milling capacity (d×p×a)		mm×mm×mm/min	80×6×500
	Bar milling machine maximum milling capacity ((d×p×a))		mm×mm×mm/min	40×40×220
	Capacity of drilling maximum ((d×a))		mm×mm/r	40×0.16
	Capacity of attack maximum ((d×p)) (D×p) (D×p) (D×p) (D×p) (D×p) (D×p) (D×p) (D×p) (D×p)		mm×mm	M22×2.5/M36×2
B axis	Largest angle ye		Degree	±102.5
	Torque ye looi (5°)		Nm	3500
	Brake lock torque (0.001°)		Nm	1000
	Insert torque		Nm	1300
Knife Library	Capacity tool ye		Lɔ	36
	Maximum length of tool		mm	300
	Maximum tool weight (Kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye)		kg	8
	Diameter dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r		mm	Φ100
	Taim waar knife-to-knife		s	2
Lower Knife Tower	Namba kuɛl		Bit	12
	Diameter de bar de boring		mm	Φ40
	Knife		mm	25×25
	Speed ye dɔɔni		rpm	4000
	Power Motor		kW	5.7
	Motor torque		Nm	27
	Luɔi ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye (d×p×a)		mm×mm×mm/min	25×14×40
	Luɔi dɔ̈ɔ̈r (d×a)		mm×mm/r	20×0.2
	Capacity of attack maximum ((d×p)) (D×p) (D×p) (D×p) (D×p) (D×p) (D×p) (D×p) (D×p) (D×p)		mm×mm	M16×2/M24×1.5
Masin dɔ̈ŋ (L×W×H)			mm	6080×2580×2580
Masin tool weight			kg	15000

Онлайн разпит

Kontakti
Kompanija
Telefon
E-mail
WeChat
Kod provjere
Сједност поруки