电动折弯机工作原理：
1.Lɔ̈ɔ̈m kä ye kek tɔ̈ɔ̈u kä ye kek tɔ̈ɔ̈u kä ye kek tɔ̈ɔ̈u kä ye kek tɔ̈ɔ̈u
2.Fixed distance control: tailored to the distance specified by moving the pusher UNIT fisde lever.
3.Using cut height adjustment, adjust the height of the sample push rod until it touches the sample.
4.Speed controller to specify the speed to match the volume using the lever on the grid alignment (set the table below)
电动折弯机判断基准：
Metod Testi
Test the method and the order of the methods listed above settings are the same (Test the method and the order of the methods listed above settings are the same) (Test the method and the order of the methods listed above settings are the same)
Lööŋ lööŋ
Kä cï kek ya looi në Samsung ka Ship SFEC test specification
Processor Operation Equipment
AC Mator rotational movement of the gear by rotating the pusher the sample should be banding
Sample is fixed on the base.the constans power and speed pusher deflection occurs and check the changes of the resulting samples. Sample is fixed on the base.the constans power and speed pusher deflection occurs and check the changes of the resulting samples.
Material:aiuminum /sus303/profile
Size:440mmL*320W*500H
Wɛɛr: 20KG
Elektrik: 220V.60HZ.25W