Fungsi Produk

1Lɔ̈k signal:

●3-phase AC 50/60Hz Voltage, Current; Lɔ̈ɔ̈i: 45 ~ 75Hz;

●Voltage range (phase voltage): 10V, 60V, 100V, 250V, 500V, etc.

●Current range: 1A, 5A, 10A, 20A, etc. ye kɔrɔ; EDA9033Dc ye cɔl: 50A, 100A, 200A, 300A, 500A, 1000A, etc.

●Signal processing: 16 bit A/D conversion, 6 channels, each channel synchronized AC sampling at 4KHz rate, module real-time data (except frequency F) update cycle can be set (40mS ~ 1000mS, each step is 10mS);

●Capacity of overload: 1.4 times the range input can be measured correctly. Capacity of overload: 1.4 times the range input can be measured correctly. Capacity of overload: 1.4 times the range input can be measured correctly. instantaneous (<10 weeks wave) current 5 times, voltage 3 times range is not damaged. (<10 weeks wave) current 5 times, voltage 3 times range is not damaged. (<10 weeks wave) current 5 times, voltage 3 times range is not damaged.

●Input impedance: voltage channel ≥1 kΩ/V; current channel ≤10mΩ;

●Switch volume input: 2 way, passive empty contact or logical level input, 0 ~ 0.5V wala short circuit 0, +3 ~ 30V wala open circuit 1;

●Temperature measurement: 9033DW model with extended function has a 3-way temperature measurement function, can measure the temperature of a 3-way cable. Nka, a ye J1 relay output ku 2 electric pulse output function ye tɔ̈ɔ̈u. A tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ

2Komunikasyon output:

●Data output: three phase voltage Ua, Ub, Uc; 3 phase current Ia, Ib, Ic; Pïïr P, Pïïr Q, Pïïr S, Pïïr PF, Pïïr Pïïr Pïïr Pïïr Pïïr Pïïr Pïïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Pïr Positive active electricity, reverse active electricity, positive passive electricity, reverse passive electricity, etc. electrical parameters.

●Output interface: RS-485 interface, 2nd wire system, +15KV ESD protection; Wala RS-232 interface, +2KV ESD gël.

●Lööŋ kɔnɔ: Lööŋ kɔnɔ MODBUS-RTU;

●Data format: lëu bï ya looi; 10 bit, 1 bit start bit 0, 8 bit data bit, 1 bit stop bit 1; Wala 11 bit, ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r

●Tɛmɛ (Bps): 1200, 2400, 4800, 9600, 19.2K

3.Output interface:

●Switch volume output: 2 way, for relay frequently open contact output, relay contact capacity is 3A250VAC. Switch volume output: 2 way, for relay frequently open contact output, relay contact capacity is 3A250VAC. Switch volume output: 2 way, for relay frequently open contact output, relay contact capacity is 3A250VAC. A lëu bï ya tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u Parameter type can be set, alarm upper and lower limit can be set.

●Power pulse output: 2 way, 1 way for active power pulse output, 1 way for non-active power pulse output, (no direction, forward and reverse sum); Pulse ye GND, ye 50 ~ 80mS, ye negative pulse; Pulse kelen ye: Module U0*I0/3600000 degrees;

●Analog output: 1 way 4 ~ 20mA, a lëu bï ya looi ka kɛ parameter output, ka kɛ remote control output;

4.A tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ:Voltage, current and so on are better than 0.2%, and other power is better than 0.5%. Voltage, current and so on are better than 0.2%, and other power is better than 0.5%. Voltage, current and so on are better than 0.2%, and other power is better than 0.5%. Voltage

5Parameters setup:Address module, port rate, power base number, alarm parameters etc. all can be set through communication interface. Address module, port rate, power base number, alarm parameters etc. all can be set through communication interface. Address module, port rate, power base number, alarm parameters etc. all can be set through communication interface.

6.Module Power Supply (Module Power Supply)+5V±5%, +8~30V, AC220(100)V ye raan ye sugandi; Power consumption: <unk>0.5W;

●+5V power supply, current consumption less than 50mA, input wavelength should be less than 100mV, input voltage 5V±5%;

●+8 ~ 30V, ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ

●AC power supply (50HZ), input voltage ye AC85V ~ 265V;

7Yɔɔr:1000V， Current input, voltage input, AC power input, relay output contacts, communication interface output are all isolated between each other, communication interface, DC power supply, electrical pulse output, switching volume input, analog volume output between common GND. Current input, voltage input, AC power input, relay output contacts, communication interface output are all isolated between each other, communication interface, DC power supply, electrical pulse output, switching volume input, analog volume output between common GND.

8Luɔi:Temperature de luɔi:-20～70℃Tɛmɛɛr tɔ̈ɔ̈u:-40～85℃；Rɛlatif humidity≤90%，86～106kPa，No corrosive gas places; No corrosive gas places; No corrosive gas places; No corrosive gas places; No corrosive gas places; No corrosive gas places; No corrosive gas places;

9Dimensions:122 * 70 * 54mm, EDA9033Dc module ye 122 * 70 * 43mm; Installation method: DIN rail card mounting;

Dimensions