●Lɔ signal

3-phase AC 50/60Hz Voltage, Current. Lɔ̈ɔ̈i: 45 ~ 75Hz.

Voltage range (phase voltage): 60V, 100V, 250V, 300V, 400V, 500V ye sɔrɔ.

Kɔnɔŋ: 1A, 2A, 5A, 20A, (50A, 100A, 200A, 500A, 1000A) etc.

Signal processing: 16 bit A/D conversion, 6 channels, each channel is synchronized AC sampling at 4KHz rate, true effective value measured. Signal processing: 16 bit A/D conversion, 6 channels, each channel is synchronized AC sampling at 4KHz rate, true effective value measured.

Data update: module real-time data update cycle can be set (40mS ~ 1000mS, 10mS per step); A lëu bï ya looi në "E Series Product Testing Software" MODBUS-RTU protocol. Ajuiɛɛr de update ee 250ms.

Capacity of overload: 1.4 times the range input can be measured correctly. Capacity of overload: 1.4 times the range input can be measured correctly. Capacity of overload: 1.4 times the range input can be measured correctly. A ye tɛ̈n yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen

●Komunikasyon output

Data output: three phase voltage Ua, Ub, Uc; 3 phase current Ia, Ib, Ic; Pïïr P, Pïïr Q, Pïïr PF, Pïïr Pa, Pb, Pc; Positive reverse active electricity and other electrical parameters (Positive reverse active electricity and other electrical parameters) (Positive reverse active electricity and other electrical parameters) (Positive reverse active electricity and other electrical parameters)

Output interface: RS-485 filar 2 ±15KV ESD gël, ka RS-232, filar 3 ±2KV ESD gël.

Tɛɛr ë kɔc (Bps): 1200, 2400, 4800, 9600, 19.2K;

Protocol de communication: ASCII code format protocol, hexadecimal LC-01 protocol, MODBUS-RTU protocol, 3 protocols can be identified simultaneously and used, no configuration required. Protocol de communication: ASCII code format protocol, hexadecimal LC-01 protocol, MODBUS-RTU protocol, 3 protocols can be identified simultaneously and used, no configuration required.

●Tɛmtɛm tɛmtɛm

Current, Voltage: 0.2 ye Power wɛɛr: 0.5 grade;

●Parameters setup

Address module, communication rate can be set through communication interface. Address module, communication rate can be set through communication interface. Address module, communication rate can be set through communication interface. Address module, communication rate can be set through communication interface. A lëu bï ya tɛmɛ 0 në interface de communication.

●Module Power Supply (Module Power Supply)+5V±5%, +8~30V, AC220(100)V

Power consumption: <unk>0.5W+5V power supply, current consumption less than 70mA, input ripple should be less than 100mV, input voltage 5V±5%.+ 8 ~ 30V ye kɔnɔ, ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔAC power supply (50HZ), input voltage ye AC85 ~ 265V.

●Voltage isolation

Lɔ̈k-Lɔ̈k: 1000VDC. Current input, voltage input, AC power input, and communication interface output are all isolated between each other.

●Modul Specifications

Dimension: 122mm * 69mm * 73mm Installation method: DIN rail card mounted

●Tʋʋm

Tɛmɛ de luɔɔi: -20 ℃ ~ 70 ℃ Tɛmɛ de tɔ̈ɔ̈u: -40 ℃ ~ 85 ℃ Tɛmɛ de tɔ̈ɔ̈u: 5% ~ 95% ka tɔ̈ɔ̈u